Why Lianda Filter Is A Good Choice For Your Filtration Solution
- 20 years manufacturing and developing experience.
- No MOQ limit, one piece is acceptable.
- 7 days fast delivery of standard 5 layer sintered wire mesh.
- Full customized sintered mesh for your application : material, filter rating, layer quantity, layer structure, thickness, etc.
- 10mm, 16mm, 25mm, 32 and various mold for sintered mesh filter tube.
Your Reliable Sintered Wire Mesh Supplier
We are focusing on the sintered wire mesh development and manufacturing. We can deliver the standard 5 layer sintered wire mesh to you in 7 days. You can customize the unique sintered wire mesh for your application with material, layer quantity, mesh alignment and structure, etc. You can use our sintered mesh for micron range filtration & separation. It can be easily cleaned and reused, so you can also save the cost.
Please Check out Our Sintered Wire Mesh Products.
The most popular and widely used sintered mesh. It can be delivered to you in 7 days.
All square weave mesh sintered for your high flow rate water filtration.
Sintered wire mesh with perforated metal for your most high pressure applications.
It is your best choice for aeration and sparging with multi-layer sintered Dutch weave mesh.
Your superior solution for seawater and hydrofluoric filtration.
Your excellent filter media for high temperature filtration like hot gas dedusting.
Your first options for the most challenging corrosive fluid filtration.
Choose the Nickel alloy sintered wire mesh when the stainless steel cannot meet your high temperature and corrosive conditions.
It is your stronger filtration solution than ordinary weaving mesh.
Why You Need Lianda Filter Sintered Wire Mesh
Lianda Filter sintered wire mesh is your first choice for surface filtration and separation in micron range. It has many advantages comparing to other filter media like polymer, filter clothing, etc.
Multi-layer sintered mesh gives higher strength for the fine mesh layer by sintering other support layers.
All the contact points of the sintered mesh are merged. So it has fixed pore size.
It can be backwashed because sintered wire mesh can easily withstand the reversed flow.
It can be cleaned by high pressure water or gas.
You can customize your unique sintered wire mesh for you specific application.
Fast Delivery of Standard Sintered Mesh
Standard sintered wire mesh is the most popular sintered mesh type for filtration. We keep several pieces of 5 layer and 6 layer standard sintered mesh in stock. They are 1 micron ,5 micron, 10 micron and 20 micron. We can deliver the standard sintered
mesh to you in 7 days.
Fully Customized Sintered Wire Mesh Factory
We have our own sintering oven and unique sintering process. You can customize the sintered wire mesh for your working condition. You can determine the layer quantity, layer structure, layer sequence, mesh alignment, material, filter rating, etc based on your requirement. We make the customized sintered mesh without any MOQ limit. One piece is acceptable.
Excellent Sintered Wire Mesh Manufacturer
We have started to produce the sintered wire mesh since 2005. We have the special designed sintering equipment and process. Our sintered mesh has been delivered to over 20 countries. We have the quality control system and the full tracking of the product.
Industries Using Lianda Sintered Wire Mesh
We have served for many industries and solve their tough problems.
We used sintered wire mesh filter cartridge and backwashing filter housing. The system can automatically backwash the sintered mesh filter element. It saved a lot more of manpower and reduced the shutdown time than using the bag filter before.
We produced customized sintered mesh filter screen for the suction nozzle automatic filter. The sintered mesh is 5 micron fine mesh with multi-layer mesh plus perforated metal. It achieved super fine grade while kept the high strength and long working life.
We have supplied 1 micron sintered wire mesh filter candle for the chemical process. It was used to filtrate and collect the fine catalyst in the process fluid. It can stop the expensive fine particles on the surface. Then the particles can be easily collected by backwashing.
Our sintered mesh filter element has outstanding performance than filter bag and polymer filter cartridges. It is the best choice for powder handling breather. Because it can withstand back pressure. And it has no risk of fiber release or other filter damage risk to contaminate the process powders.
We have produced customized sintered mesh with perforated metal for the customer’s existing filter dryer. It sintered the 6 layer standard mesh with 5 to 10 mm thick perforated metal. It has super strength for double work load and higher vacuum rate.
Specification of 5 Layer Sintered Wire Mesh
- Specification of 5 layer standard sintered wire mesh
| Model | Nominal Rating μm | Structure | Thickness | Air Permeability l/min/cm2 | Bubble Point Pressure mmH20 |
| A5-1 | 1 | 100+400×2800+100+12×64+64×12 | 1.7 | 1.81 | 360-600 |
| A5-2 | 2 | 100+325×2300+100+12×64+64×12 | 1.7 | 2.35 | 300-590 |
| A5-5 | 5 | 100+200×1400+100+12×64+64×12 | 1.7 | 2.42 | 260-550 |
| A5-10 | 10 | 100+165×1400+100+12×64+64×12 | 1.7 | 3.00 | 200-500 |
| A5-15 | 15 | 100+165×1200+100+12×64+64×12 | 1.7 | 3.41 | 200-480 |
| A5-20 | 20 | 100+165×800+100+12×64+64×12 | 1.7 | 4.50 | 170-450 |
| A5-25 | 25 | 100+165×600+100+12×64+64×12 | 1.7 | 6.12 | 150-410 |
| A5-30 | 30 | 100+400+100+12×64+64×12 | 1.7 | 6.70 | 120-390 |
| A5-40 | 40 | 100+325+100+12×64+64×12 | 1.7 | 6.86 | 100-350 |
| A5-50 | 50 | 100+250+100+12×64+64×12 | 1.7 | 8.41 | 90-300 |
| A5-75 | 75 | 100+200+100+12×64+64×12 | 1.7 | 8.70 | 80-250 |
| A5-100 | 100 | 100+150+100+12×64+64×12 | 1.7 | 9.10 | 70-190 |
| Thickness: 1.7(mm); Porosity : ~37%;Weight kg/m²: 5-layers sintered wire mesh (8.4) 6-layers sintered wire mesh (14.4). 6-layers construction adds additional 12 mesh to ordinary 5-layers mesh for better pressure resistance, thus thickness reaches 3.5mm. | |||||
The main benefit is that it can make multi-layer sintered mesh. So it can keep the fine filter rating and have the higher strength provided by other support layers.
SS316L is the standard and most popular stainelss steel for sintered mesh. SS304, SS310, SS904L, Duplex 2205 2507 are also available. Hastelloy C22 C276 are among the most popular for Nickel alloy sintered mesh. Monel 400 , Inconel 601 625 are also available.
It it often limited by the wire mesh we can find. For stainless steel sintered mesh, the filter rating is from 1 micron, 5 micron to hundreds of microns. You should check with us before ordering other material.
Yes. 5 layer and 6 layer sintered wire mesh are the widely used type. We keep these types in stock. They can be fast delivered.
You can give your working conditions and application requirements. We can then provide our recommendation. You can also give us your design of the sintered mesh. We can produce it or give our suggestions on modifications.
All the aspects can be customized. They are listed and not limited to: material, filter rating, mesh type, layer quantity, mesh alignment, thickness, perforated metal, etc.
