x
Send Your Inquiry Today
Quick Quote

What Are the 4 Types of Filters? An Industrial Guide

Frequent filter changes, falling flow rates, and particles reaching downstream equipment can all point to a selection problem. You may have the right micron rating but the wrong filter design for your process.

Industrial liquid filters differ in how they capture solids, hold contamination, and return to service after loading. Those differences affect maintenance labor, consumable costs, and production availability.

This guide compares four common options: bag filters, cartridge filters, basket strainers, and self-cleaning filters. You will learn how each works, where it fits, and which operating details to check before purchasing. The aim is to match your equipment to a measurable process requirement.

What Are the Four Common Industrial Filter Types?

Four common filter types used in industrial liquid filtration are bag filters, cartridge filters, basket strainers, and self-cleaning filters.

They offer different approaches to particle removal and maintenance:

1. Bag Filters

Industrial bag filter housing

How Does a Bag Filter Work?

A bag filter directs liquid through a filter bag supported inside a pressure housing. The bag retains suspended solids while the filtered liquid leaves the vessel.

The housing supports the assembly, while the bag provides the filtration medium. Bag fit and sealing also affect the installed result.

When Should You Consider a Bag Filter?

Bag filtration is an option for process water, chemical liquids, paints, coatings, and other streams containing suspended particles. Single-bag and multi-bag arrangements accommodate different throughput requirements.

Consider this design when accessible media replacement is a priority. Compare bag capacity and replacement frequency under your actual solids load.

What Should You Check?

Confirm bag material, retention performance, housing compatibility, and access for replacement. If production cannot stop for bag changes, assess a suitable duplex arrangement.

LIANDA’s bag filter housings include single-bag, multi-bag, and duplex configurations.

2. Cartridge Filters

Cutaway showing how a cartridge filter works

How Does a Cartridge Filter Work?

A cartridge filter uses cylindrical elements installed inside a housing. Liquid passes through the media, which retains particles according to its structure and tested performance.

Cartridges can use pleated, wound, or melt-blown constructions. These designs provide different flow paths and contamination-handling characteristics.

When Should You Consider a Cartridge Filter?

Consider cartridges when your process needs a specific media construction or defined particle-removal requirement. Pleated designs place additional media area within a compact element.

Choose against the required downstream quality. The word “cartridge” alone does not establish filtration efficiency.

What Should You Check?

Verify element dimensions, end connections, seals, media compatibility, and supporting performance data. Also evaluate replacement frequency under representative operating conditions.

You can compare available constructions on LIANDA’s cartridge filter page.

3. Basket Strainers

Basket filter diagram

How Does a Basket Strainer Work?

A basket strainer uses a removable basket made from perforated material, wire mesh, or a combination of both. Liquid passes through the openings while debris remains inside the basket.

The basket can be removed for cleaning and inspection. Its opening size should match the protection requirement of downstream equipment.

When Should You Consider a Basket Strainer?

Basket strainers are commonly used to intercept debris before pumps, valves, and meters. They are useful when accessible, reusable screening fits the process.

A simplex design has one chamber. A duplex arrangement allows flow to switch between chambers during servicing.

What Should You Check?

Confirm basket opening size, available open area, pressure drop, and cleaning access. Check whether your process can tolerate a shutdown for servicing.

Review LIANDA’s basket strainers when comparing simplex and duplex pipeline arrangements.

4. Self-Cleaning Filters

Industrial self-cleaning filter

How Does a Self-Cleaning Filter Work?

A self-cleaning filter uses a reusable filtering element and a mechanism that removes accumulated solids. The cleaning method depends on the equipment design.

Backwashing is one approach: reverse flow dislodges contamination and carries it to a discharge outlet. Cleaning may be triggered by differential pressure or a timed sequence.

When Should You Consider a Self-Cleaning Filter?

Consider automatic cleaning when frequent manual servicing limits production or increases labor costs. Suitable configurations can maintain filtration during cleaning.

However, cleaning performance must match your contaminants. Ask the supplier to evaluate solids behavior and operating conditions before recommending a model.

What Should You Check?

Verify cleaning pressure requirements, discharge arrangements, cycle frequency, and maintenance access. Confirm the downstream flow available during cleaning.

LIANDA’s automatic backwash filters illustrate this approach to self-cleaning filtration.

Comparing the Four Filter Types

Use the following table to organize your evaluation. Actual performance depends on the selected media, equipment size, and operating conditions.

Selection factorBag filterCartridge filterBasket strainerSelf-cleaning filter
First question to askHow often will bags need changing?What retention performance does the element provide?What debris must the basket intercept?Can the cleaning mechanism remove these solids?
Maintenance planningBag access and replacementElement access and replacement or approved cleaningBasket removal and cleaningCleaning-system inspection and periodic servicing
Continuity planningEvaluate duplex or parallel arrangementsEvaluate duplex or parallel arrangementsEvaluate a duplex arrangementVerify performance during the cleaning cycle
Purchasing evidenceBag specification and housing detailsMedia specification and test dataOpening size and pressure-drop informationCleaning requirements and application evidence

Use the equipment category to narrow your options. Make the final decision using process data and a clear acceptance requirement.

How to Choose the Right Filter

Define the Contaminant and Required Result

Start by identifying what you need to remove. Record particle size, concentration, and whether the solids are rigid, soft, fibrous, or sticky.

Then define an acceptable downstream result. “Protect the pump from large debris” requires a different specification from “meet a controlled fine-particle limit.”

Give the supplier both pieces of information. A filter recommendation becomes more useful when the contamination problem and acceptance criteria are explicit.

Compare Retention Performance

A micron rating alone does not fully describe particle removal. Ask for the removal efficiency, test method, and conditions supporting the rating.

Two elements with the same stated micron rating may perform differently. You can review this issue in Absolute vs Nominal Filtration Ratings: Differences, Misconceptions, and Cost Realities.

Verify Flow Rate and Effective Area

Provide normal and peak flow rates. Also include viscosity and temperature, since these affect hydraulic sizing.

For a preliminary area check:

Required effective area = Flow rate ÷ Selected operating flux

The selected flux needs an application-specific basis. It is not a universal value assigned to a filter category.

For sizing considerations, read Filter Area Calculation: Formula, Flux, Effective Area And Metal Filter Element Selection.

Check the Entire Assembly

Review the housing, media, seals, connections, and internal supports together. Confirm their suitability for the fluid and full operating range.

Also allow space for maintenance. A filter that fits the pipework may still need additional clearance for removing a bag, cartridge, or basket.

Compare Operating Costs

Request a cost comparison over the same operating period. Include consumables, labor, cleaning utilities, waste handling, and planned downtime.

For automatic equipment, include discharge losses and maintenance of the cleaning mechanism. For replaceable media, use a realistic changeout frequency.

The purchase price is only one input. Your comparison should reflect how the equipment will run in your plant.

Can You Combine Different Filter Types?

Yes. Different stages can address different parts of the contamination load.

An upstream stage may remove larger debris, while a downstream stage controls smaller particles. Each stage should have a defined purpose.

Illustrative Two-Stage Arrangement

Suppose a process-water stream contains occasional rust flakes and finer suspended particles. A possible arrangement is:

Basket strainer → Cartridge filter → Downstream process

You would evaluate the strainer for debris interception and the cartridge for the required final particle removal. Confirm the combined pressure drop and service intervals before selecting equipment.

This is an illustrative arrangement, not a standard design for every water system. Your actual contamination profile determines whether two stages are justified.

For applications where upstream manual cleaning becomes frequent, a suitable self-cleaning stage may also be worth evaluating.

Common Selection Problems and Solutions

The Final Filter Clogs Too Quickly

Check incoming solids concentration, particle-size distribution, and available filtration area. Record actual throughput and changeout intervals before changing the specification.

Consider upstream separation or additional area when the data supports it. A tighter rating should follow a demonstrated downstream requirement.

Particles Pass Through a New Filter

First, verify the installed element, seals, and seating. Then compare measured downstream quality with the supplier’s stated retention performance.

Use the findings to correct installation or specification issues. Replacing the filter with a finer label may leave the underlying cause unresolved.

Automatic Cleaning Does Not Restore Performance

Review cleaning conditions, discharge restrictions, and the type of accumulated contamination. Ask whether the mechanism is suitable for those solids.

Request application testing when cleaning behavior remains uncertain. Automatic operation needs a demonstrated cleaning result.

Maintenance Interrupts Production

Measure how often servicing occurs and how long it takes. Use those records to compare duplex, parallel, and automatic-cleaning options.

Include access and isolation arrangements in the evaluation. Equipment selection and maintenance planning should be completed together.

Conclusion

Bag filters, cartridge filters, basket strainers, and self-cleaning filters offer different maintenance and particle-control options. Choose using your contamination profile, required filtrate quality, and operating conditions.

Filter typeBasic designMain selection priority
Bag filterA filter bag supported inside a housingSolids handling and bag replacement
Cartridge filterOne or more cylindrical filter elementsMedia selection and defined particle retention
Basket strainerA removable perforated or mesh basketPipeline equipment protection
Self-cleaning filterA reusable filtering element with an automatic cleaning mechanismCleaning suitability and operating continuity

This is a practical equipment comparison for industrial liquid service. Other applications use additional filter technologies, and these four categories can overlap in their media or cleaning arrangements.

To discuss a suitable configuration, contact LIANDA Filtration with your process data and installation requirements.

FAQ

Which Filter Type Is Best for Industrial Liquids?

The best choice depends on your contaminants, downstream requirement, and maintenance constraints. Start with those conditions, then compare equipment designs.

A filter category alone cannot determine suitability.

Is a Bag Filter Better Than a Cartridge Filter?

Neither is automatically better. Compare the specific bag and cartridge options against the same retention requirement, throughput, and operating period.

Include media consumption and servicing labor in the decision.

Can a Basket Strainer Replace a Fine Filter?

Only if its demonstrated performance meets the downstream requirement. A basket selected for large debris protection should not be assumed to provide fine-particle control.

Verify the required opening size and resulting pressure drop.

Are Self-Cleaning Filters Maintenance-Free?

No. Cleaning mechanisms, controls, seals, and discharge components still need inspection and servicing.

Automatic cleaning can change the maintenance workload, but it does not remove the need for maintenance.

Are These the Only Four Types of Filters?

No. These are four common equipment types for industrial liquid particle filtration.

Other applications use technologies such as membrane systems, adsorptive media, and specialized air or gas filters.

Tailor-made Filtration Solutions

Lianda Filter is the leading sintered wire mesh and metal filter elements manufacturer in China.
Scroll to Top